4MS SCM Breakout

Breakout module for SCM MK2 Expansion for the Shuffling Clock Multiplier offering additional possibilities to play with. To be connected with the SCM on the backside. Features: • Expansion module for the 4ms Shuffling Clock Multiplier • CV Shuffle (jack and knob) • Selects which beats are “slipped” by CV Slip • CV Skip (jack and knob) • Omits certain beats in a pattern • CV Pulse Width (jack and knob) • Controls width of output pulses • 4x Fast (jack and switch) • CV gate or manual switch speeds up all jacks by a factor of 4 • Button turns 4x Fast on/off, or inverts incoming signal on jack • Mute (jack and button) • CV gate or manual switch stops any more pulses from starting • All pulses that have already started will end normally • Button turns Mute on/off, or inverts incoming signal on jack • Re-sync CV Trigger input jack • Resets beat pattern to beat one • Additional CV Rotate and CV Slip jacks • Adds to the main panel’s Rotate and Slip jacks • 8 H.P. Eurorack module • Connects directly to the SCM with a standard 16-pin cable (same cable used for Eurorack/Doepfer style power connections) • SCM Breakout does not connect directly to the power rail New features since version 1: • Mute and 4x Fast are LED buttons • Pressing Mute and 4x Fast inverts signal on jack • Knobs are centered straight up (12:00) • Rotate and Slip knobs act as attenuators to breakout jacks, and the corresponding jacks on the main SCM module are added to this attenuated signal.