Endorphin.es LINK25

TASCAM 8-Channel Passive 4HP DB-25 Adapter Eurorack Module

• Passive, bidirectional adapter between 8 Eurorack patch points and a DB-25 connector
• Female D-SUB 25 connector with TASCAM / AES59 analog pinout
• 8 electrically independent channels: 4 stereo pairs, 8 mono paths, or any combination
• Direction determined by the connected device, with no input or output switches
• For recording stems from a modular synth, feeding a mixer, or connecting two enclosures with a single multicore cable
• 3U (4 HP) and 1U (22 HP) panels included; 3U panel pre-installed
• Zero power consumption and a depth of just 15 mm

Endorphin.es Link25 is a passive, bidirectional adapter between eight unbalanced 3.5 mm Eurorack patch points and a female analog D-SUB 25 / DB-25 connector, wired according to the TASCAM analog / AES59 pinout. It allows you to connect your modular system to audio interfaces, mixers, and other enclosures using a single multi-cable, without cluttering the enclosure with long individual cables.

Eight channels between Eurorack and DB-25 with TASCAM pinout

With Link25, you can record stems from your modular system through an audio interface, feed a mixer for live performance, route line outputs back to the Eurorack, connect two modular cases with a single multi-cable, or set up a parallel path for live performance and recording.

Independent channels, stereo or mono

Channels 1 through 8 are electrically independent. You can use them as four stereo pairs—CH1/2, CH3/4, CH5/6, and CH7/8—as eight mono paths, or in any combination. The signal path is determined by the connected device: there are no input or output switches.

Passive module with 3U and 1U panels

Link25 is completely passive and does not draw power from the rack’s power supply. It comes with a factory-installed 3U, 4 HP panel and a 1U, 22 HP panel, with a depth of only 15 mm behind the panel.

Technical Specifications

• Brand: Endorphin.es
• Model: Link25
• Type: Passive bidirectional Eurorack / DB-25 adapter
• Eurorack patch points: 8, unbalanced 3.5 mm jacks
• Connector: D-SUB 25 / DB-25 female, analog
• Pinout: TASCAM analog / AES59
• Channels: 8 electrically independent (4 stereo pairs or 8 mono)
• Direction: Determined by the connected device; no switch
• Included panels: 3U (pre-installed) and 1U
• Width: 4 HP (3U), 22 HP (1U)
• Depth: 15 mm behind the panel
• Current draw: 0 mA at +12 V, -12 V, and 5 V