Milk Multicore Cable DSub / XLRm 1m

MILK DSub / XLR Male Multicore Cable - 1 m

The MILK 1-meter DSub / XLR Male Multicore Cable is a multicore cable designed for audio connections using DSub connectors and Neutrik NC3MXX male XLR connectors. It is constructed with Klotz PW08x PolyWIRE multicore cable and Neutrik connectors, offering a compact solution for professional audio connections.

Klotz PW08x PolyWIRE Multicore Cable

The Klotz PW08x PolyWIRE multicore cable uses stranded bare copper conductors with a cross-sectional area of 0.22 mm². The pairs are insulated with red and blue polyethylene (PE) and feature individual shielding consisting of a stranded tinned copper drain wire and an AL/PETP foil.

The PVC jackets are numbered and color-coded in groups of eight pairs for easy identification. The outer jacket is made of black, soft, and opaque PVC.

Neutrik NC3MXX Male XLR Connectors

The cable is equipped with Neutrik NC3MXX 3-pin male XLR connectors from the XX series. The connector features a die-cast zinc body with a nickel-plated finish and silver-plated brass contacts. The latch-lock mechanism helps maintain a stable connection.

The clamp-style cable retention system improves mechanical security, while the polyurethane rear sleeve helps protect the cable from stress during use. The contacts are designed for soldered connections.

Technical Specifications Neutrik NC3MXX

• Brand: Neutrik
• Model: NC3MXX
• Type: 3-pole male XLR connector
• Contacts: brass with 2 µm silver plating
• Body: die-cast zinc with nickel-plated finish
• Insulating insert: PA66 polyamide
• Locking mechanism: die-cast zinc
• Cable clamp: polyacetal (POM), with clamp system
• Rear jacket: polyurethane
• Connection type: solder
• Locking system: latch lock
• Supported cable diameter: 3.5–8 mm
• Contact resistance: ≤ 3 mΩ
• Capacitance between contacts: ≤ 4 pF
• Initial insulation resistance: > 10 GΩ
• Dielectric strength: 1.5 kV DC
• Rated current per contact: 16 A
• Lifespan: over 1,000 mating cycles
• Protection rating: IP40
• Operating temperature: -30 °C to +80 °C
• Compliance: IEC 61076-2-103

DSub connector

The multipole connection uses a DSub connector to interface with compatible audio equipment. The exact connector model and its pin configuration are not specified in the available information.

Technical Specifications of the Multicore Cable

• Product brand: MILK
• Type: DSub / XLR male multicore cable
• Length: 1 m
• Cable used: Klotz PW08x PolyWIRE
• Outer cable diameter: 12.5 mm
• Conductors: stranded bare copper, 7 x 0.20 mm
• Conductor cross-sectional area: 0.22 mm²
• Pair insulation: red and blue polyethylene (PE)
• Pair shielding: stranded tinned copper drain wire and AL/PETP foil
• Pair identification: numbered and color-coded PVC sheaths in groups of eight pairs
• Outer jacket: black, soft, and opaque PVC
• Conductor resistance: less than 85 Ω/km
• Crosstalk: greater than 100 dB at 15 kHz
• XLR connectors: Neutrik NC3MXX male
• Multipole connector: DSub, model unspecified

Applications

The MILK 1-meter DSub/XLR Male Multicore Cable is designed for multipole audio connections in professional installations and setups that require a DSub interface and Neutrik male XLR terminations. Its 1-meter length makes it suitable for close-proximity connections between compatible equipment.