Milk Multicore Cable DSub / XLRm 5m

MILK DSub / Male XLR Multicore Cable - 5 m

The 5-meter MILK DSub / XLR Male Multicore Cable is a multicore cable designed for audio connections using DSub connectors and Neutrik NC3MXX male XLR connectors. It uses Klotz PW08x PolyWIRE multicore cable and Neutrik connectors to establish connections between compatible audio equipment.

Klotz PW08x PolyWIRE Multicore Cable

The cable uses stranded bare copper conductors with a cross-sectional area of 0.22 mm². The pairs are insulated with red and blue polyethylene (PE) and feature individual shielding consisting of a stranded tinned copper drain wire and an AL/PETP foil.

The PVC jackets are numbered and color-coded in groups of eight pairs for easy identification. The outer jacket is made of black, soft, and opaque PVC.

Neutrik NC3MXX Male XLR Connectors

The cable is equipped with Neutrik NC3MXX connectors, 3-pin male XLR connectors from the XX series. The body is made of die-cast zinc with a nickel-plated finish, while the contacts are made of brass with a 2 µm silver plating.

The connector features a latch-lock mechanism, a cable clamp, and a polyurethane rear sleeve. The contacts are designed for soldered connections.

Technical Specifications for the Neutrik NC3MXX

• Type: 3-pole male XLR connector
• Model: Neutrik NC3MXX
• Contacts: brass with 2 µm silver plating
• Body: Die-cast zinc with nickel-plated finish
• Insulating insert: PA66 polyamide
• Locking mechanism: die-cast zinc
• Cable clamp: polyacetal (POM), with clamp system
• Rear jacket: polyurethane
• Connection: solder
• Locking system: latch lock
• Cable diameter supported by the connector: 3.5–8 mm
• Contact resistance: ≤ 3 mΩ
• Capacitance between contacts: ≤ 4 pF
• Initial insulation resistance: > 10 GΩ
• Dielectric strength: 1.5 kV DC
• Rated current per contact: 16 A
• Lifespan: over 1,000 mating cycles
• Protection rating: IP40
• Operating temperature: -30 °C to +80 °C
• Compliance: IEC 61076-2-103

DSub connector

The multipole connection uses a DSub connector to interface with compatible audio equipment. The exact connector model and pin configuration are not specified in the available information.

Technical Specifications of the Multicore Cable

• Brand: MILK
• Type: DSub / XLR male multicore cable
• Length: 5 m
• Cable used: Klotz PW08x PolyWIRE
• Outer cable diameter: 12.5 mm
• Conductors: stranded bare copper, 7 x 0.20 mm
• Conductor cross-sectional area: 0.22 mm²
• Pair insulation: red and blue PE
• Pair shielding: stranded tinned copper drain wire and AL/PETP foil
• Pair identification: numbered and color-coded PVC sheaths in groups of eight pairs
• Outer jacket: black, soft, and opaque PVC
• Conductor resistance: less than 85 Ω/km
• Crosstalk: greater than 100 dB at 15 kHz
• XLR connectors: Neutrik NC3MXX male
• Multipole connector: DSub, model unspecified

Applications

The MILK 5-meter DSub / Male XLR Multicore Cable is designed for multipole audio connections between compatible equipment that uses a DSub interface and male XLR connectors. The 5-meter length allows for connections between audio devices that require a greater distance than shorter versions can provide.