Warm Audio WA73-EQ

Warm Audio WA73-EQ

Preamplificatore microfonico con Eq 3 bande stile Neve 1073

 899,00 ( 736,89 + iva)

Disponibile immediatamente

Ordina entro le 12:00, spedito entro un giorno.

Disponibile immediatamente

- +
Add to Wishlist
COD: 45915 Categorie: , , ,
SKU: 45915

Spedizione gratuita

Pagamenti sicuri

Warm Audio WA73-EQ

Preamplificatore microfonico con Eq 3 bande stile Neve 1073

A Single Channel ’73 For The Rest Of Us

If there’s one style of preamp that professional engineers would unanimously agree has defined the tone of pop/rock records for decades, it would most definitely be the venerable ’73-style of mic pre. ’73-style preamps have been massively used in recording and live applications for many years and are still considered to be the “Holy Grail” of preamp choices today. The Warm Audio “WA73 Family” consists of single and dual channel ’73-style preamps (with & w/out EQ), that each pay careful homage to British audio history.

When we at Warm Audio decided to release the WA73-EQ it was imperative that it met vintage expectation in both design and performance. The tone and sweet character that vintage ’73-style mic preamps impart is so unique and familiar, that we had only the pure desire to release sonically accurate reproductions. After years of R&D, careful reverse-engineering, and countless hours of auditioning, the WA73-EQ has been born!

The WA73-EQ is a “Desert Island” boutique preamp, but it can also be classified as a studio and live work-horse. Classic ’73-style preamps are known for being versatile tools that work with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA73-EQ equally shines on all types of microphones and sources including; vocals, acoustic/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain and a fully discrete Carnhill Transformer balanced signal path, there’s no recording, mixing or engineering task that the WA73-EQ can’t handle.

Hand Wired & Hand Assembled

Classic ’73-style preamps were often hand-wired and so is the WA73-EQ! Guru’s claim that a portion of the sought after classic British tone can be attributed to the hand-wired nature of the build. The WA73-EQ is hand-wired and hand assembled, including the pcb components that are all populated by hand.

UK Custom Carnhill Transformers

Enthusiasts unequivocally get excited about the components used in classic ’73-style British preamps. The signal transformers are a common topic of conversation. Vintage units used various versions of transformers throughout the years, but the most coveted were the earliest versions. These are regarded as the most desirable choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful reproductions of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day ’73-style preamp sound as sweet and musical as does our WA73-EQ with these beautiful custom Transformers.

Capacitors & Signal Path

An important part of the classic British circuits not often discussed are the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern ’73-style reproductions.

​UK Blore Edwards Switch-Pots

A great sounding ’73-style circuit should be just as reliable as it is great sounding. The complex dual concentric switch potentiometers in the EQ sections of the WA273-EQ are made in the UK by Blore Edwards who manufacture military spec switches and potentiometers. The use of Blore-Edwards components is no small inclusion for a ’73-style preamp-eq in this price range.

Specifications

  • Single Channel, Class A, ’73-style British Microphone Preamp with EQ
  • UK made Carnhill Transformers
  • UK made – Blore Edwards EQ dual-concentric switch potentiometers
  • Hand Wired, hand assembled
  • 80dB of gain – resistor stepped gain switch
  • Fully discrete
  • TONE button – Changes input transformer impedance for varying tone
  • Polarity switch
  • 48v phantom power
  • Inductor based 3 band EQ
  • Low Band Boost/Cut – 35, 60, 110, 220 Hz
  • Mid Band Boost/Cut – 360, 700, 1600, 3200, 4800, 7200 Hz
  • High Band Boost/Cut – 10, 12, 16 kHz
  • Additional high band frequency EQ points added (compared to vintage 1073)
  • 4 position inductor based hipass filter – 50, 80, 160, 300 Hz
  • XLR mic inputs (front & back)
  • Line level TRS input
  • TS Send/Receive insert jacks
  • XLR & TRS line level outputs
  • Direct In, instrument input
  • Output control
  • Led level indication
  • Freq response 20Hz – 20kHz +/-.5 dB
  • 19″ rackable
  • Internal IEC 115v/230v power inlet

 

ADC

No

Channels

1 (Mono)

Formato Hardware

Rack

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “Warm Audio WA73-EQ”

In conformità con quanto previsto dal Decreto Legislativo 6 settembre 2005 n. 206 (e successive modifiche ed integrazioni), il cliente Consumatore, ove non soddisfatto dei prodotti ovvero del contenuto dei servizi acquistati presso il Venditore, potrà restituire i prodotti medesimi o rinunciare al diritto alla prestazione dei servizi ed ottenere il rimborso del prezzo già corrisposto in sede di pagamento anticipato.

Il diritto di recesso-restocking è applicabile solo ed esclusivamente per acquisti operati da persone fisiche (consumatore) e quindi per acquisto di beni non utilizzati professionalmente e per vendite iniziate e risolte a distanza.

Gli articoli acquistati possono essere resi entro 14 giorni successivi alla consegna dei prodotti ovvero entro i 14 giorni successivi all’acquisto dei beni o dei servizi, inviando una comunicazione via raccomandata A.R. all’indirizzo via F. Sabatini, 10 – 00135 Roma, contenente tutte le informazioni necessarie ed utili ad una corretta elaborazione della pratica di restituzione e rimborso.
Tale comunicazione dovrà necessariamente contenere tutto quanto di seguito indicato:
a. l’espressa volontà del Cliente di voler recedere in tutto o in parte dal contratto di acquisto;
b. il numero e la copia del documento (fattura – documento di trasporto) comprovante l’acquisto dell’ordine rispetto al quale si intende esercitare il diritto di recesso;
c. la descrizione ed i codici dei Prodotti rispetto ai quali si esercita il diritto di recesso.

Il riaccredito, comprensivo delle spese di spedizione, verrà effettuato dal Venditore entro 14 giorni dalla ricezione della comunicazione via raccomandata A.R. sopra citata.

Sono tuttavia esclusi dal diritto di recesso i seguenti articoli:

Prodotti audiovisivi o i software informatici sigillati, aperti dal consumatore
Beni confezionati su misura o chiaramente personalizzati
Il materiale dovrà ritornare integro e completo dell’imballo originale e dei manuali d’uso.
Le spese di spedizione per il reso delle apparecchiature sono a carico del consumatore.

Per maggiori informazioni:
http://www.parlamento.it/parlam/leggi/deleghe/99185dl.htm

Scopri di più nei nostri reparti

Start typing and press Enter to search

Shopping Cart