DPA 4011C Compact Cardioid Mic

Compact cardioid condenser microphone

• High-performance compact cardioid microphone
• Designed for professional studio, theater, TV and live recordings
• Ultra-high SPL handling without distortion
• Perfect for close-up and spot-miking shots
• Linear frequency response and natural reproduction
• Discreet design and matte black finish

DPA 4011C: compact cardioid microphone for invisible recordings

The DPA 4011C Compact Cardioid Mic is the ideal choice for those seeking exceptional sound quality in a small size. Recognized worldwide as the standard for handling extreme sound levels, it is designed for use where visibility must be minimized without sacrificing accuracy.

Maximum precision for close-miking and sensitive applications

Featuring a first-order cardioid pattern, the 4011C offers excellent separation between sound sources and faithful rendering of the original source. It is perfect for close-miking acoustic instruments, orchestral sections or vocal performances. Also ideal for off-camera recording, Foley, theater and broadcasting.

Neutral audio quality and natural sound

Flat on-axis frequency response and precise phase response ensure extremely accurate sound reproduction. The off-axis response is also controlled and faithful, to reduce interference without coloring the sound.

Modular compatibility with DPA preamplifiers.

Like all DPA series pencil microphones, the 4011C is compatible with a variety of preamplifiers: from the transparent MMP-A to the compact MMP-C to the wired versions MMP-E and MMP-G, which are also ideal for compact and professional wireless setups.

Technical Specifications.

• Polar pattern: Cardioid
• Operating principle: Pressure gradient
• Capsule type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective range ±2 dB at 30 cm: 40 Hz - 20 kHz
• Nominal sensitivity ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level (A): typical 18 dB(A), max 20 dB(A)
• ITU-R BS.468-4 equivalent noise: typical 25 dB
• THD distortion < 1%: 136 dB SPL RMS, 139 dB SPL peak
• Dynamic range: typical 121 dB
• SPL max (THD 10%): 144 dB SPL peak
• Nominal output impedance: 100 Ω
• Minimum load impedance: 2 kΩ
• Cable transmission capacity: up to 100 m
• Output balancing: Impedance balancing
• Common mode rejection (CMRR): > 40 dB
• Power supply: 48V phantom (P48)
• Current consumption: 3.5 mA
• Connector: XLR-3M (Pin 1: ground, Pin 2: signal +, Pin 3: -)
• Weight: 109 g
• Microphone and capsule diameter: 19 mm
• Microphone length: 35 mm
• Maximum RMS output voltage: 2.2V
• Polarity: +V at pin 2 for positive pressure
• Temperature range: -40°C to 45°C
• Relative humidity: up to 90%
• Matching tolerance (response and sensitivity): ±1 dB
• Phase deviation between pairs: <10°
• Color: matte black