SPL SMC 7.1 (Silver)

SPL SMC 7.1 (Silver)

Il controller per monitor surround SMC 7.1 è un controller per monitor da studio analogico per sorgenti 7.1 e stereo.

Each of the two balanced 7.1 inputs and the two balanced stereo inputs can be routed to the balanced 7.1 output. The L/R signals of the active input can optionally be routed to the alternative stereo output. With the high-quality headphone amplifier, you can listen to the L/R signal of the active input as well as to single channels of the 7.1 inputs.

The eight-ganged potentiometer controls the volume of all channels directly – no control circuits like VCAs are used.

The SMC 7.1 is built up in high-quality analog technique, which ensures a linear frequency response up to 100 kHz as well as an outstanding dynamic range.

• Two Balanced 7.1 Inputs
• Two Balanced Stereo Inputs
• Balanced 7.1 Output
• Balanced Stereo Output with Sub Out
• Extensive Routing Options
• Solo in Place / Solo to Center
• High-Quality Headphone Amplifier
• Dedicated Analog Meter Output
• Internal Power Supply
• Made in Germany

Specifiche Tecniche

Inputs

Sub-D-25-Input

• Sub-D-25 (TASCAM-Standard)
• Impedance: 20 kOhms
• CMR: -82 dB
• Max. Input level: +22 dB

XLR-Input

• Neutrik XLR, symmetrisch, Pin 2 = (+)
• Impedance: 20 kOhms
• CMR: -82 dB
• Max. Input level: +22 dB

Outputs

Sub-D-25-Output

• Sub-D-25 (TASCAM-Standard)
• Frequency range: 10 Hz to 150 kHz ( -3 dB)
• Crosstalk at 1 kHz: -92 dB
• THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
• Noise (A-weighted): -93 dB
• Dynamic range: 115 dB

XLR-Output

• Neutrik XLR, balanced, Pin 2 = (+)
• Frequency range: 10 Hz to 150 kHz ( -3 dB)
• Crosstalk at 1 kHz: -92 dB
• THD & N: 0,001% (0 dBu, 1 kHz, 100 kOhms load)
• Noise (A-weighted): -93 dB
• Dynamic range: 115 dB

Headphone Output

• 6,35 mm TRS connector
• Pin wiring: Tip = Left, ring = right, sleeve = GND
• Impedance: 22 kOhms
• Frequency range: 10 Hz to 80 kHz ( -3 dB)
• Crosstalk at 1 kHz: -70 dB
• THD & N: 0,001% (0 dBu, 1 kHz, 40 kOhms load)
• Noise (A-weighted): -93 dB
• Dynamic range: 113 dB

Internal operating voltages

• Analog: +/- 18 V Power supply
• Mains voltage (switchable): 230 V AC / 50Hz or 115 V AC / 60Hz
• Fuses: 230 V = T 500 mA; 115 V = T 1 A
• Power consumption: max 25 VA

Dimensions and Weight

• (WxHxD) 10.95 x 4.6 x 13.1 in (278 x 103 x 333 mm)
• 9.04 lbs (4.1 kg), unit only
• 11.02 lbs (5.0 kg), shipping