Intellijel 7U x 104HP Gen-2 Silver Performance case with TPS135W MAX power

104 hp portable Eurorack case with power supply and connections - Silver

• Eurorack 7U / 104HP Gen-2 case in Silver finish, designed for studio and live performance
• Space: 2 x 3U (104HP ) + 1 x 1U (104HP) for Intellijel 1U modules
• Repositionable 1U row (top, middle or bottom)
• Integrated TPS135W MAX power supply with 34 shrouded headers (no flying bus)
• Full rear connections: 8 TRS 1/4" Neutrik audio jacks + MIDI DIN In/Out/Thru + MIDI over USB-C
• Deep lid: closes with patch inserted for transport
• Sturdy aluminum chassis with ergonomic handle and internal locking system
• Retractable legs for two angles or flat desktop use
• VESA 100x100 (M4) holes for mounting on arms/stand
• Compatible with Joiner Plates for stacking two cases (up to 14U, accessory sold separately)

Intellijel 7U 104HP Performance Case Gen-2 Silver

TheIntellijel 7U x 104HP Performance Case Gen-2 is one of the most complete bases for building a portable, reliable Eurorack system ready to play anywhere: studio, stage or "tabletop" setup. It offers two 3U rows for Eurorack modules and an additional 1U row for the Intellijel utility range, keeping the system uncluttered and super functional.

The lid is designed with enough depth to close the case even with cables already attached, so you can transport your patch without having to redo it every time. If you want to expand, you can also stack two Performance Cases via Joiner Plates (sold separately).

Flexible 7U space: 2x3U + 1U relocatable

Each row is 104HP wide: you have 2 x 104HP/3U for Eurorack modules and 1 x 104HP/1U for Intellijel 1U modules. An important plus is the ability to move the 1U row and put it on top, in the middle or at the bottom, depending on your workflow. Mounting is facilitated by M3 threaded strips.

TPS135W MAX power supply: more power, less noise

The case integrates the TPS135W MAX power supply with 34 shrouded connectors: enough to connect up to 34 modules without resorting to flying-bus cables. The design aims for better performance and noise reduction on the system, with high efficiency and low ground impedance.

Power supply specifications (rail)

The included power supply is a Meanwell AC/DC 90W (stated available power 85W distributed over 3 rails):

• +12V: 6A (72W max)
• -12V: 5A (60W max)
• +5V: 2A (10W max)

Audio and MIDI/USB-C connections on the rear panel.

Gen-2 is designed to "play well with others": on the back you'll find 8 TRS 1/4" Neutrik audio connections to conveniently connect to mixers, effects, and outboards, freeing up rack space for more creative modules. Wiring options are provided for balanced mono, unbalanced stereo or send/return configurations (depending on the 1U modules used).

For control, you also have MIDI over USB-C and 3 DIN 5-pin MIDI connectors (In/Out/Thru), plus rocker switch and 2.5 mm plug barrel power input.

Aluminum frame, ergonomics and VESA mounting

The aluminum frame with ergonomic handle is designed to protect the modules while moving. Retractable legs allow two working angles for better visibility and access to panels and patches, or you can keep the case flat on a desk. Plus, with VESA 100x100 holes, you can attach the case to standard arms or stands to create custom setups.

Specifications.

• Format: Eurorack 7U
• Width: 104HP per row
• Module space: 2 x 3U 104HP + 1 x 1U 104HP (Intellijel 1U)
• Row 1U: repositionable (top/middle/bottom)
• Module mounting: M3 threaded strips
• Power supply: integrated TPS135W MAX
• Power supply header: 34 shrouded Eurorack
• Power supply included: Meanwell AC/DC 90W (85W declared on 3 rails)
• Rail outputs: +12V 6A, -12V 5A, +5V 2A
• Audio I/O rear: 8 x TRS 1/4" Neutrik
• MIDI: USB-C MIDI + DIN 5-pin In/Out/Thru
• Ergonomics: retractable legs (2 corners) + flat use
• Mounting: VESA 100x100 (M4) holes
• Color: Silver
• Notes: deep cover for closure with patch inserted; slots for accessories/joiner plates
• Stacking compatibility: Joiner Plates for stacking two cases (accessory sold separately)