Milk Multicore Cable DSub / XLRf 5m

MILK DSub / XLR Female Multicore Cable - 5 m

The MILK 5-meter DSub / XLR Female Multicore Cable is a multicore cable designed for audio connections using DSub connectors and Neutrik NC3FXX female XLR connectors. It uses Klotz PW08x PolyWIRE multicore cable and Neutrik connectors to establish connections between compatible audio equipment.

Klotz PW08x PolyWIRE Multicore Cable

The cable uses stranded bare copper conductors with a cross-sectional area of 0.22 mm². The pairs are insulated with red and blue polyethylene (PE) and feature individual shielding consisting of a stranded tinned copper drain wire and an AL/PETP foil.

The PVC jackets are numbered and color-coded in groups of eight pairs for easy identification. The outer jacket is made of black, soft, and opaque PVC.

Neutrik NC3FXX Female XLR Connectors

The cable is equipped with Neutrik NC3FXX connectors, 3-pole female XLRs from the XX series. The body is made of die-cast zinc with a nickel-plated finish, while the CuSn8 bronze contacts feature a 2 µm silver plating.

The connector incorporates a latch-lock mechanism with a metal latch, female contacts with a cage-style design, and a solder barrier to prevent solder from reaching the mating area. Additional ground contacts improve electrical continuity between the connector housing and the shielding. The clamp-style cable retainer enhances mechanical retention, while the polyurethane rear sleeve protects the cable from stress caused by bending.

Technical Specifications Neutrik NC3FXX

• Brand: Neutrik
• Model: NC3FXX
• Type: 3-pole female XLR connector
• Contacts: CuSn8 bronze with 2 µm silver plating
• Body: Die-cast zinc with nickel-plated finish
• Insulating insert: PA66 polyamide
• Locking element: die-cast zinc with Ck 67 steel spring
• Locking element plating: nickel
• Cable clamp: polyacetal (POM), with clamp system
• Rear jacket: polyurethane
• Connection: solder
• Locking system: latch lock
• Cable diameter supported by the connector: 3.5–8 mm
• Maximum conductor cross-sectional area: 2.5 mm² / 14 AWG
• Contact resistance: ≤ 3 mΩ
• Capacitance between contacts: ≤ 4 pF
• Initial insulation resistance: > 10 GΩ
• Dielectric strength: 1.5 kV DC
• Rated current per contact: 16 A
• Rated voltage: less than 50 V
• Insertion force: ≤ 20 N
• Extraction force: ≤ 20 N
• Lifespan: over 1,000 mating cycles
• Protection rating: IP40
• Operating temperature: -30 °C to +80 °C
• Flammability: UL 94 V-0
• Compliance: IEC 61076-2-103

DSub connector

The multipole connection uses a DSub connector to interface with compatible audio equipment. The exact connector model and pin configuration are not specified in the available information.

Technical Specifications of the Multicore Cable

• Brand: MILK
• Type: DSub / female XLR multicore cable
• Length: 5 m
• Cable used: Klotz PW08x PolyWIRE
• Outer diameter of the multicore cable: 12.5 mm
• Conductors: stranded bare copper, 7 x 0.20 mm
• Conductor cross-sectional area: 0.22 mm²
• Pair insulation: red and blue PE
• Pair shielding: stranded tinned copper drain wire and AL/PETP foil
• Pair identification: numbered and color-coded PVC sheaths in groups of eight pairs
• Outer jacket: black, soft, and opaque PVC
• Conductor resistance: less than 85 Ω/km
• Crosstalk: greater than 100 dB at 15 kHz
• XLR connectors: Neutrik NC3FXX female
• Multipole connector: DSub, model unspecified

Applications

The MILK 5-meter DSub / Female XLR Multicore Cable is designed for multipole audio connections between compatible equipment that uses a DSub interface and female XLR connectors. The 5-meter length allows you to connect audio devices located farther apart.