Milk Multicore Cable DSub / DSub 3m

MILK Multicore Cable DSub / DSub 3m

The MILK Multicore Cable DSub / DSub 3m is a 3-meter multicore cable equipped with two D-Sub connectors—one at each end—designed to establish multipole connections between compatible audio equipment. The multicore design allows multiple signal lines to be combined into a single cable, simplifying the organization of connections in studios and professional audio systems.

Copper conductors and PE insulation

The cable uses stranded bare copper conductors, each consisting of 7 wires with a diameter of 0.20 mm and a nominal cross-sectional area of 0.22 mm². The stranded structure contributes to the conductor’s flexibility, while the cross-sectional area is suitable for signal transmission in the cable’s intended applications.

The conductors are insulated with polyethylene (PE) and color-coded red and blue to facilitate identification of the conductors within each pair.

Individual Pair Shielding

Each pair is equipped with shielding made of an AL/PETP composite foil, combined with a stranded tinned copper drain wire. This structure is designed to individually shield the pairs and help limit unwanted crosstalk between signal lines.

Pair Identification and Cable Organization

The pairs are organized into groups of eight and identified by numbered, color-coded PVC jackets. This solution facilitates line identification and cable organization during installation and connection.

Outer Sheath and Multicore Diameter

The cable is sheathed in a soft, opaque black PVC outer jacket , with an outer diameter of approximately 12.5 mm. The jacket protects the internal structure during use in audio installations.

Electrical characteristics

• Conductor resistance: less than 85 Ω/km.
• Crosstalk: greater than 100 dB at 15 kHz, according to the technical specifications provided for the cable.

D-Sub Connectors and 3-Meter Length

This MILK version is 3 meters long and terminated with two D-Sub connectors. It is designed for multipole connections between devices equipped with compatible interfaces, allowing multiple signal lines to be managed through a single connection. The number of pins and the specific connector model are not specified.