DPA 4011C Stereo Pair with Clips and Windscreens in Peli Case

Stereo pair compact cardioid condenser microphone - with Peli Case

• Stereo pair of high-performance cardioid compact microphones
• Includes clip, windscreen and durable Peli Case
• Neutral and linear frequency response: 40 Hz - 20 kHz
• Ultra-high SPL handling up to 144 dB
• Ideal for studio, theater, cinema and live stereo recordings
• Interchangeable preamplifier module for maximum flexibility

DPA 4011C Stereo Pair: compact microphones for precise, invisible recordings

The DPA 4011C stereo pair is the perfect choice for professional applications where discretion and audio quality must go hand in hand. Used in the studio, on stage or in video productions, they offer outstanding performance in a compact, unobtrusive format.

High definition for spot miking and stereo imaging

With their narrow cardioid pattern, these microphones provide accurate sound separation, making them ideal for close-miking of acoustic instruments, orchestras, vocals, and stereo ambient shots. The low-impact design also makes them perfect for video and theater productions.

Maximum sonic neutrality

Flat frequency response and phase coherence ensure natural source reproduction without coloration. Off-axis behavior is also controlled, for faithful rendering of room sound or any returns.

DPA modularity and flexibility

4011Cs can be combined with various DPA preamplifiers, from the compact MMP-C to the wired MMP-E and MMP-G modules, which are also compatible with wireless systems. This versatility makes them a suitable solution for any professional recording context.

Technical Specifications.

• Polar pattern: Cardioid
• Operating principle: Pressure gradient
• Capsule type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective range ±2 dB at 30 cm: 40 Hz - 20 kHz
• Nominal sensitivity ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level (A): typical 18 dB(A), max 20 dB(A)
• ITU-R BS.468-4 equivalent noise: typical 25 dB
• THD distortion < 1%: 136 dB SPL RMS, 139 dB SPL peak
• Dynamic range: typical 121 dB
• SPL max (THD 10%): 144 dB SPL peak
• Nominal output impedance: 100 Ω
• Minimum load impedance: 2 kΩ
• Cable transmission capacity: up to 100 m
• Output balancing: Impedance balancing
• Common mode rejection (CMRR): > 40 dB
• Power supply: 48V phantom (P48)
• Current consumption: 3.5 mA
• Connector: XLR-3M (Pin 1: ground, Pin 2: signal +, Pin 3: -)
• Weight: 109 g
• Microphone and capsule diameter: 19 mm
• Microphone length: 35 mm
• Maximum RMS output voltage: 2.2V
• Polarity: +V at pin 2 for positive pressure
• Temperature range: -40°C to 45°C
• Relative humidity: up to 90%
• Matching tolerance (response and sensitivity): ±1 dB
• Phase deviation between pairs: <10°
• Color: matte black