XAOC Devices Praga

four-channel stereo mixer with volume , pan , aux , mute

 460,00 ( 377,05 + VAT)

Arriving shortly
Contact us to verify delivery times

- +
Add to Wishlist
Finance from 17,40 / month
Low Rate Financing
(Tan 10,03% - Taeg 13,70%)
More info

  • Free Shipping
  • After Sale Support
  • 2 Years Warranty
  • Secure Payments

Arriving shortly
Contact us to verify delivery times

SKU: 33572 Categories: , ,
SKU: 33572

 

The Praga is a four-channel stereo mixer with volume and panorama potentiometers plus a mute button per signal path. CV inputs allow users to modulate the first-mentioned parameters. LED meters visualize the level of each channel. Effects can be connected via two auxiliary sends. Direct outputs emit results of individual signal paths.

In use, the Praga shines with natural, clean sound and a very low noise floor. Gimmicks in the circuit design make it possible to create soft compression and overdrive effects. Thanks to its well-arranged front panel, the module is equally suited for studio and live setups. Several Pragas can be connected to create bigger mixing setups.

The Praga 1967 Voltage Controlled Mixing Console comes equipped with four channel strips. Each audio path features an input, potentiometers plus CV connectors for altering the level and panorama as well as a mute button. Additionally, there is a level meter (post-fader) per channel, composed of five LEDs. Two sockets (left / right) emit the sum of all audio paths. On top of that, each channel offers a direct output. It is fed independently from the master bus, meaning sum and direct out connectors can be used simultaneously.

For routing audio material to either of the auxiliary sends, the Praga features four more potentiometers. – One per channel. As long as the control elements are in middle position, none of the aux channels is fed. By turning the knob to the left respectively right, users can send audio material to the first or second auxiliary path. Audio material is tapped off behind the level control section. Each aux send comes equipped with one output and two inputs (left / right). The latter pass incoming signals on to the stereo sum.

The Praga offers two modulation modes for altering the volume. Users can switch between them by pressing the mute button of the corresponding channel for a few seconds. The control element’s background lighting visualizes the currently active mode of operation:

  • Green – Unipolar: In this mode, the level potentiometer adds an offset to incoming CV signals. With the control element turned completely clockwise and a control voltage of 8 V, the channel opens to 0 dB. Completely closed, audio material is attenuated by -85 dB.
  • Red – Bipolar: In this mode, the level potentiometer not only adds an offset, but also controls the modulation intensity. An example on how this works: If the user turns down the volume manually, the amplitude modulation is decreased as well. Control voltages in the range of -5 V to +5 V are perfect for using this mode of operation. With the level knob turned completely counterclockwise, audio material is attenuated by -56 dB without any modulation.

In case incoming control voltages are stronger than the maxima mentioned above, the Praga dynamically attenuates them. Results sound somewhat like compression. The mix bus is equipped with a soft clipping stage, which adds overdrive to signals above 16 Vpp. Thanks to short fades, pressing the mute buttons while playing does not result in clicks.

Several Praga modules can be chained via ribbon cables.

CONNECTORS

Per channel:
Audio input
Vol and Pan CV inputs
Direct output

Per Aux:
Audio output
Two audio inputs (left / right)

Sum:
Two audio outputs (left / right)

DIMENSIONS

3U Eurorack module, 20 HP wide, compatible with Skiff cases
Power consumption: 210 mA at +12 V and 180 mA at -12 V
Depth

45mm

Width

Reviews

There are no reviews yet.

Be the first to review “XAOC Devices Praga”

Return and restocking option is available for private customers only. We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt. It must be returned in the original packaging and in saleable condition and must be returned freight prepaid. Return and restocking rights are not applicable for Audio/Video and software products. Shipping and handling charges to and from are not refundable.

Find out more in our departments

Start typing and press Enter to search

Shopping Cart

×