Take your sound to the next level

D16 Group D16 PunchBox 2

Hybrid synthesizer kick drum plug-in for producers and beatmakers

SKU: 148611

Hybrid kick drum synthesizer plug-in for producers and beatmakers

  • Four parallel generators: three sample-based layers and one main kick generator
  • Kick generator with five modes: Sample, 909, 808, 606, and Wavetable
  • Emulations of classic drum machine kick circuits for an instant analog character
  • Integrated FX rack with Bitcrusher, Distortion, Resonant filter, SH-101, Modern EQ, and Vintage EQ
  • Mono Bass, Limiter, and Soft Clip sections for controlling low frequencies and peaks
  • Flexible patchbay with 10 routing topologies for the first four effects
  • Advanced Editor with multi-stage envelopes and real-time waveform preview
  • Real-time pitch detection to tune the kick to your project
  • 1,506 samples, 1,120 Master Presets, 243 Kick Presets, and 66 wavetables
  • Drag-and-drop wave export, Creative Randomizer, and multiple outputs

D16 Group PunchBox 2 is a dedicated kick drum creation tool, built around four parallel generators that work together to shape the final sound. Three sample-based layers shape the supporting elements, while the main Kick generator combines sample playback, synthesis inspired by classic drum machines, and modern, flexible sound generation. A full FX rack, an Advanced Editor with multi-stage envelopes, and a rich factory library let you go from ready-to-use presets to the most detailed sound design.

Four Generators for a Custom Kick

PunchBox 2’s generators can be triggered independently, routed to the effects section, and—depending on the configuration—respond to MIDI input via Keytrack and Velocity settings.

Three sample-based layers

Layer 1, Layer 2, and Layer 3 are universal sample-based generators designed to build the supporting elements of the final kick. Each layer offers the same set of controls to shape and balance its role in the mix: pitch, stereo positioning, sample start point, filter, and signal routing to the FX section.

Five-Mode Main Kick Generator

The Kick generator is the main source, responsible for the body of the kick. In Sample mode, it uses audio samples as its source, with controls for start offset, ring modulation, level, stereo width, panning, and filter. The 909, 808, and 606 modes are based on emulations of famous drum machine kick circuits and cover a range of analog-inspired timbres, from the most punchy and defined to the deepest with long decay. Wavetable mode adds a more synthetic and flexible sound source, with wavetable selection, frame position, phase, level, and filter controls; the Position parameter can be modulated in the Advanced Editor.

Built-in FX rack for refining the kick

The built-in effects rack offers modules for tone shaping, filtering, saturation, and low-frequency control. The first four algorithms can be rearranged and integrated into different patchbay configurations for maximum flexibility in the signal flow.

Bitcrusher, Distortion, and Filter

The Bitcrusher reduces resolution and sample rate to add grit, bite, and digital character, and is directly derived from D16’s experience with the Decimort processor. It includes input gain, filter, resampling rate keytracking, and FX Amount control. The Distortion module adds harmonic saturation and clipping character, ranging from subtle enrichment to more aggressive modeling, with controls for shape, dynamics, preamp, filter, contour, tone, output level, and FX Amount. The Filter operates in two modes: Resonant, a multimode filter with selectable slope, and SH-101, based on the filter character of the classic SH-101 synthesizer.

Modern and Vintage Equalizers

The equalizer operates in two modes. Modern offers a classic parametric EQ workflow across high, mid, and low bands, with controls for gain, frequency, and mid-band width. Vintage offers a passive-style response, based on the legacy of the Pultec EQP-1 equalizer design, with separate attenuation and boost controls for the highs and lows and a dedicated section for the mids.

Mono Bass, Limiter, and Soft Clip

Mono Bass controls the stereo image of low frequencies: you set a crossover frequency, and the signal below it becomes mono, while higher frequencies remain unchanged. The Limiter is the rack’s final dynamics stage, featuring threshold, output, and auto-makeup; when limiting is disabled, it functions as a simple output gain stage. After the Limiter, the Soft Clip captures residual peaks and smooths the output when using more aggressive limiting.

Flexible Patchbay with 10 Topologies

The Flexible Patchbay Config lets you define the signal path through the FX rack by choosing from 10 routing topologies. Together with the FX Send controls in the generator section, it allows the first four effects to interact in different ways, far beyond a simple series chain.

Advanced Editor and Sound Design Tools

The Advanced Editor gives you in-depth control over specific parameters over time, with multi-stage envelopes organized into Layers, Kick, and Master groups. The envelopes use editable nodes and curves; each parameter group can have its own duration; and the editor offers detailed control over node placement, curve shape, modulation range, snap, zoom, and time scaling. Preset envelopes give you a quick starting point, so you don’t have to build curves from scratch.

Waveform Preview and Pitch Detection

The Waveform Preview displays the waveform of individual generators and the processed master output in real time—even with multiple previews simultaneously—so you can see how changes to the envelopes affect individual layers and the final signal. Real-time Pitch Detection analyzes the estimated pitch of the kick drum as you work and helps you tune it to the rest of the project, with continuous feedback directly within the instrument.

Factory Library and Sticky Sample Browser

PunchBox 2 includes an extensive factory library with Master Presets, Kick Presets, samples, and dedicated effect presets, organized in a clear and easy-to-navigate way. The Sticky Sample Browser, in a panel docked to the interface, lets you browse, filter, and preview both factory and custom content, assigning them directly to the generators. The instrument is rounded out by drag-and-drop WAV export, the Creative Randomizer, and routing to multiple outputs.

Technical Specifications

  • Brand: D16 Group
  • Product: PunchBox 2
  • Type: instrument plug-in for creating kicks
  • Generators: 4 parallel (3 sample-based layers, 1 main kick generator)
  • Kick generator modes: Sample, 909, 808, 606, Wavetable
  • MIDI Response: Keytrack and Velocity
  • Effects: Bitcrusher, Distortion, Filter, Equalizer, Mono Bass, Limiter, Soft Clip
  • Filter: 2 models (Resonant, SH-101)
  • Equalizer: 2 models (Modern, Vintage)
  • Effect Routing: Flexible Patchbay Config with 10 topologies
  • Modulation: Advanced Editor with multi-stage envelopes and preset envelopes
  • Analysis Tools: Real-time Pitch Detection, Waveform Preview
  • Other features: Sticky Sample Browser, drag-and-drop wave export, Creative Randomizer, multi-output routing
  • Factory content: 1,506 samples, 1,120 Master Presets, 243 Kick Presets, 66 wavetables, 28 Bitcrusher presets, 28 Distortion presets
  • macOS, operating system: Mac OS X 10.13 through macOS 26
  • macOS, memory: 4 GB
  • macOS, CPU: Intel x86 / Apple Silicon
  • macOS, formats: VST2, VST3, AU, AAX
  • Windows, operating system: Windows 7 or later
  • Windows, memory: 4 GB
  • Windows, CPU: Intel x86 / AMD x86
  • Windows, formats: VST2, VST3, AAX

Software Category

SYNTHESIZERS

€ 94,10 (€ 81,12 + VAT)

  • Instant download
  • Clock icon download the license right after the purchase
Your cart

Empty cart

Countries and Languages