Arturia AudioFuse 16Rig

Arturia AudioFuse 16Rig

USB Audio Interface with 16×8 I/O

The center of your study

Do you have a studio full of synthesizers? Do you need to record an entire band? Do you have complex monitoring and routing needs? AudioFuse 16Rig offers you a high level of connectivity, versatility and the ease of use you need for your professional audio applications. Give importance to your sound.

16 is just a starting point

Give your audio system an interface that offers you all the connections you need. You can keep your entire setup connected to the rear I/O, leaving the front ports free for microphones, instruments or additional devices. The inputs and outputs can be expanded via ADAT and routed according to your needs.

Perfect sound quality

Give your recordings the shine and clarity they deserve with high-quality 24-bit AD/DA converters from ESS and Cirrus Logic. Whether it’s synths, guitars, vocals, or any combination of inputs, you can count on pristine sound.

An independent audio device

For DAW-free jamming sessions or live performances, the AudioFuse 16Rig is the simple and ideal choice. This interface allows you to route audio and MIDI signals easily even without the use of a computer, thanks to its internal low-latency mixer controllable via MIDI. It is also possible to store presets to facilitate the transition between different configurations with extreme ease.

Extensive routing possibilities and special functions

Configure the AudioFuse 16Rig’s connections to meet a wide range of needs, including multiple sends/returns for recording and creative mixing, speaker A/B switching for confident mixing, guitar reamping, multiple headphone outputs for recording of ensembles and much more.

Choose your workflow

Make AudioFuse 16Rig work for you; control its settings directly from the front panel or via the AudioFuse Control Center software, configure the interface for use on a desktop or in a rack, integrate it seamlessly into any studio context and easily switch between different audio scenarios to the other.

Software included

• Analog Lab Intro
• AudioFuse Control Center
• Pre 1973
• Pre V76
• Pre TridA
• Filter MINI
• Chorus JUN-6
• Comp FET-76
• Delay TAPE-201
• Rev PLATE-140
• Phaser BI-TRON
• Comp DIODE-609

Specifications

Line Inputs

• Input impedance: 20kΩ (symmetric), 10kΩ (asymmetric)
• Maximum input level Rear: +24dBu, Front +22dBu
• Pad mode Rear: -12dB, Front: -10dB
• Frequency response 20Hz to 20kHz +/-0.06dB typical
• Dynamic range 118dB (A-weighted)
• THD+N @ 1kHz -113dB (A-weighted)

Line Outputs (DC coupled)

• Output impedance: 240Ω balanced, 120Ω unbalanced
• Maximum output level +24dBu
• Frequency response 20-20kHz +/-0.04dB
• Dynamic range 120dB (A-weighted)
• THD+N @ 1kHz -106dB (A-weighted)
• DC voltage amplitude +/-8.7V (asymmetrical)

Speakers Outputs

• Output impedance: 240Ω balanced, 120Ω unbalanced
• Maximum output level +20dBu
• Frequency response 20-20kHz +/-0.02dB
• Dynamic range 126dB (A-weighted)
• THD+N @ 1kHz -114dB (A-weighted)

Instrument Input

• Input impedance: 1.1MΩ asymmetric
• Maximum input level: +20dBu
• Gain range: 55dB
• Pad mode: -10dB
• Frequency response 20Hz to 20kHz: +/-0.1dB typical
• Dynamic range 114dB (A-weighted)
• THD+N @ 1kHz -105dB (A-weighted)

Microphone Preamps

• Input impedance: 2,7kΩ
• Maximum input level: +22dBu
• Gain range: 55dB
• Pad mode: -20dB
• Equivalent Input Noise (EIN): -129.5dBu (A-weighted)
• Frequency response 20Hz to 20kHz: +/-0.08dB
• Dynamic range: 117dB (A-weighted)
• THD+N @ 1kHz -110dB (A-weighted)

Phones

• Output impedance: 5Ω
• Maximum output level: +14.4dBu
• Dynamic range: 109dB (A-weighted)
• Power @ 33ohm @1%THD 271mW @-78dB THD
• THD+N @ 1kHz -103dB (A-Weighted)