• Versatile Signal Flow
  • Voltage-Controlled VCA with Saturation
  • Mono/Stereo Direct Output
  • Two Voltage-Controlled Effect Sends
  • Voltage-Controlled Pan/Crossfade
  • Mute, Solo-in-place and PFL

Frap Tools CGM Stereo Channel (SC)

(1 customer review)

Single-channel stereo module for the CGM Eurorack mixe

 189,00For European customers, please select your country to view the correct price including vat

Arriving shortly
Contact us to verify delivery times

- +
Add to Wishlist

Arriving shortly
Contact us to verify delivery times

SKU: 58509 Categories: , ,
SKU: 58509
  • Versatile Signal Flow
  • Voltage-Controlled VCA with Saturation
  • Mono/Stereo Direct Output
  • Two Voltage-Controlled Effect Sends
  • Voltage-Controlled Pan/Crossfade
  • Mute, Solo-in-place and PFL
SKU: 58509 Categories: , ,
SKU: 58509

Frap Tools CGM Stereo Channel (SC)

Single-channel stereo module for the CGM Eurorack mixe

The Stereo Channel is a single-channel stereo module for the CGM Eurorack mixer, fully compatible with every other product of this family.

Thanks to its advanced I/O configuration, it can work as stereo-to-stereo, mono-to-mono, mono-to-stereo, and stereo-to-mono.

The gain control and the two mono FX sends can work in pre or post-fader mode, and the panpot can also work as a dual mono crossfader, making it suitable for blending two mono sources into a single mono sum.

All the parameters are voltage-controllable for creative mixing automation.

Mechanical mute, PFL, and Solo-in-Place complete the feature set suitable both for studio and live performances.

Versatile Signal Flow

Thanks to a flexible I/O semi-normalization pattern, you can use the SC in other ways than stereo. You can patch a mono signal and record it in stereo straight after the VCA to track the voltage-controlled panning, or blend two mono sources into one, and more.

Voltage-Controlled VCA with Saturation

The Channel module features two amplitude controls: an input VCA and a volume fader. The input VCA is voltage-controllable and, if the signal has enough amplitude, it can overdrive the circuit with a creamy, fat saturation. A peak LED tells when the signal is clipping, but don’t fear cranking it up!

Mono/Stereo Direct Output

An output allows you to take the channel output for parallel processing or multitrack recording. You can choose to work pre-fader (straight after the input VCA) or post-fader (with the main fader affecting the signal’s amplitude). The outputs are semi-normaled: use just the left output for a mono sum, and both channels for a stereo signal.

Two Voltage-Controlled Effect Sends

The yellow and green knobs are two effect sends levels. They can work pre- or post-fader, and they can be voltage-controlled for expressive and creative results.

Voltage-Controlled Pan/Crossfade

The Pan knob defines the stereo placement of the sound, which you can voltage-control as well. The Pan/Crossfade switch lets you use the SC as a dual mono mixer, blending two mono signals into a mono output. When in Crossfade mode, the pan pot controls the balance of the two inputs.

Mute Button

The mute button allows you to remove a channel from the group sum with a click. The mute function works over the input VCA, so it will also mute the effect sends.

Solo-In-Place Switch

The Solo-In-Place switch lets you prepare a “scene” of channels to be isolated from the other ones, and then recall it through the Safe Solo switch on the Group module. It can be seen as a mute group function that allows you to mute all the channels outside the solo scene with a click.

PFL Button

Push the PFL button and rotate the PFL fader on the master module to preview a channel: it’s convenient for tuning your oscillators or checking if everything is ok before bringing whatever sound source into the mix.


Specifications

  • 6HP
  • 38 mm deep
  • 70 mA +12V – 45 mA -12V
Depth

38 mm

Width

1 review for Frap Tools CGM Stereo Channel (SC)

  1. thierry.antinolfi (verified owner)

    The CGM stero SC is a good entry to create your own modular mixer system.
    Added to group to masterone, it’s a good choice for particular mixing system.

    Each entry are configurable by CV.

    Little problem : this module is hard to find !!!!!

Only logged in customers who have purchased this product may leave a review.

Return and restocking option is available for private customers only.
We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt.
It must be returned in the original packaging and in saleable condition and must be returned freight prepaid.
Return and restocking rights are not applicable for Audio/Video software products.
Shipping and handling charges to and from are not refundable.

Find out more in our departments

Start typing and press Enter to search

Shopping Cart