Free ShippingFor all orders over € 250, shipping in Italy will be free. All our shipments are managed by national and international couriers with express service to guarantee delivery in 24h * from the dispatch of the goods from our warehouse. * For the islands and some remote areas the timing could increase to 48h.
After Sale Support
After Sale SupportAt your side to grow with you. Behind this website there are real people who work every day to always offer the best possible service and give maximum support even after the purchase.
- 2 Years Warranty
- Secure Payments
Arrel Audio R-601
The R-601 is a Guitar/Bass splitter designed for the most demanding professional recording studios where guitar systems, and multiple amplifiers are used simultaneously. The R-601 design, based on four separated transformers, is able to drive up to four amplifiers at the same time without noise and ground loops problems that often plagues most systems. Its high input sensibility allows coupling even with battery powered DI Boxes or with unbalanced low level outputs.
This amplifier is characterized by very high linearity and dynamic range, with distortion and noise at the lowest limit, resulting from the use of advanced circuit topologies. Signal level is controlled by a potentiometer allowing a 35 dBu range (-25 dBu to +10dBu). Input and output impedance is calibrated in order to obtain the best pairing with guitar/bass amplifiers. 48V Phantom Power provides power to the DI box if needed.
The target amplifier can be selected by using the front panel buttons, a footswitch or by a wireless remote control. This feature allows the musician to switch amplifiers (located in the recording room) comfortably from the control room. More than one amplifier can be selected at the same time. When the channel buttons are switched off, the remote control (footswitch or wireless remote control) is automatically activated.
|Number of Channels:||1 Input, 4 Outputs|
|Power Supply||Universal switching regulator|
|Operating Voltage||100V ~ 240V ±10%, 50/60 Hz.|
|Power Consumption||10 W|
|Hi-Z Input||Electronically balanced, Input Impedance 47 KΩ|
|Hi-Z Gain||Range -25 / +10 dBu, Max +20 dBu.|
|Line Input||Electronically Balanced, Impedance >10 KΩ.|
|Line Gain||Range -25 / +10 dBu, Max +20 dBu.|
|Bandwidth||10 – 30.000 Hz +/-1 dB.|
|Distortion + Noise||<0.003% ( typical 0.001%).|
|Output Level||Electronically Balanced, Working Output Level -6 dBu. Max. Level +28 dBu, Output Load Impedance > 600 Ω|
|Front Panel Controls||Gain Pot., 48V Phantom Power switch, 4 Output Amplifier selection buttons, Illuminated power on/off switch.|
|Front Panel Input Connectors||1/4” TRS jack|
|Front Panel Indicators||10-LED Bargraph Level Indicator (7 x green, 3 x red), 1.5dB step, 1 x red LED (48V Phantom), 4 x Output LEDs (yellow OUT 1, red OUT 2, green OUT 3, blue OUT 4).|
|Rear Panel Output Connectors||4 x TRS 1/4″‘ jacks.|
|AC mains||IEC C13 16 A connector, AC mains cord with IEC Schuko 16A.|
|Construction||Half rack metal box|
|Dimensions||W 200 mm / 7.87”, H 40 mm / 1.57”, D 140 mm / 5.51”.|
Return and restocking option is available for private customers only. We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt. It must be returned in the original packaging and in saleable condition and must be returned freight prepaid. Return and restocking rights are not applicable for Audio/Video and software products. Shipping and handling charges to and from are not refundable.