PMC6-2

Active 3-way nearfield reference monitor with ATL™ bass loading

 10.345,00 ( 8.479,51 + VAT)
Price for pair

Available

Shipped in 3-4 Weeks

- +

Available

  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 33Hz – 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space measurement.
    Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
  • Ceiling-mount yoke allows suspension in multi-channel or immersive systems
  • Free Shipping
  • After Sale Support
  • 2 Years Warranty
  • Secure Payments

PMC6-2

Active 3-way nearfield reference monitor with ATL™ bass loading

The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.

This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.

A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.


Specifications

  • Type Active 3-way nearfield reference monitor with ATL™ bass loading
  • Drive Unit Complement
    LF 2 x PMC 150mm (6”) studio 6 drivers
    MF PMC 55mm (2”) soft dome mid-range
    HF PMC 27mm (1”) soft dome tweeter
  • Effective ATL™ Length 2m (6.6ft)
  • Frequency Response 33Hz – 25kHz (- 3dB) (@1m full space, on-axis)
  • Sensitivity +4dBu input signal = 98dB SPL @ 1m
  • Max continuous SPL 109dB @1m
    (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Max Peak SPL 121dB @1m
    (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Directivity
    H +/-50 degrees
    V +60/-40 degrees (-6dB off axis @10kHz)
  • Input XLR switchable between analogue & digital AES3
    Analogue input – +20/+24dBu max. input level (selectable) – 22K ohm input impedance
    Digital input – 16/24-bit AES3 signal, left, right or left + right – 18 – 192kHz Sample Rate – 110 ohm input impedance
    Expansion card slot – For future connectivity upgrades
  • Output XLR digital AES3 (fixed 24-bit @ 96kHz)
  • Network RJ45 for use with PMC SoundAlign web interface
  • Features
    Level Trim (+/-10dB)
    High-pass filter (20 – 200Hz, 12dB/Oct)
    Delay (0 – 30mS) Phase (normal or inverted)
    LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)
    Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)
    User presets (3 + factory defaults)
  • Latency 2.4mS
  • Amplifier power per channel
    LF 2 x 400Wrms
    MF 1 x 400Wrms
    HF 1 x 400Wrms
  • Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
  • Power consumption (idle) 50W
  • Power consumption (max) 1500W
  • Cabinet dimensions
    H 400mm (15.7”)
    W 430mm (16.9”)
    D 372mm (14.6”)
  • Weight 21.3kg (47lbs) each
Dimensione Woofer (Pollici)

6

DSP

Yes

Offer description

Price for pair

Speaker type

Active

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Return and restocking option is available for private customers only. We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt. It must be returned in the original packaging and in saleable condition and must be returned freight prepaid. Return and restocking rights are not applicable for Audio/Video and software products. Shipping and handling charges to and from are not refundable.

Find out more in our departments

Start typing and press Enter to search

Shopping Cart