PMC8-2

Active 3-way nearfield reference monitor with ATL™ bass loading

 16.091,00 ( 13.189,34 + VAT)
Price for pair

Available

Shipped in 3-4 Weeks

- +

Available

  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 25Hz – 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 113dB @1m (half space value calculated as +3dB from full space measurement.
    Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC8-2 + PMC8-2 SUB creates PMC8-2 XBD, with up to 6dB of additional headroom
  • Optional dedicated floor stands for PMC8-2 (40”) and PMC8-2 XBD (19”)
  • Free Shipping
  • After Sale Support
  • 2 Years Warranty
  • Secure Payments

PMC8-2

Active 3-way nearfield reference monitor with ATL™ bass loading

As with any PMC loudspeaker, thanks to its super-consistent dispersion and tonal balance, the PMC8-2 may be simply and seamlessly combined with smaller PMC speakers to create larger multi-channel or immersive systems.

The twin bass drivers are partnered with the same PMC55 mid-range tweeter, DSP system and four channels of 400W Class-D amplification used in the PMC6-2. Again, the speaker is configurable directly via the rear panel or using the browser-based SoundAlign™ software from a computer or tablet.

Together with the precisely tuned ATL™ cabinet and hexagonal Laminair™ vents, the PMC8-2 delivers phenomenal performance that approaches that of our Main reference monitors, with smooth and consistent bass response down to 25Hz, a revealing mid-range and wide, stable sound-staging. As with the rest of the range, the PMC8-2’s superb definition, fidelity, dynamics and bass accuracy allow mix decisions to be made quickly with complete confidence, and with no listening fatigue even after long sessions.

PMC8-2s can be upgraded through the addition of a PMC8-2 SUB to create an XBD system, enhancing the system’s bass headroom by 6dB. Dedicated short and taller floor-stands are available for the PMC8-2 and PMC8-2 XBD systems which position them on the ideal listening axis.


Specifications

  • Type Active 3-way nearfield reference monitor with ATL™ bass loading
  • Drive Unit Complement
    LF 2 x PMC 200mm (8”) studio 8 drivers
    MF PMC 55mm (2”) soft dome mid-range
    HF PMC 27mm (1”) soft dome tweeter
  • Effective ATL™ Length 3m (9.8ft)
  • Frequency Response 25Hz – 25kHz (- 3dB) (@1m full space, on-axis)
  • Sensitivity +4dBu input signal = 98dB SPL @ 1m
  • Max continuous SPL 113dB @1m
    (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Max Peak SPL 125dB @1m
    (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Directivity H+/-45 degrees V+/-50 degrees (-6dB off axis @10kHz)
  • Input XLR switchable between analogue & digital AES3
    Analogue input – +20/+24dBu max. input level (selectable) – 22K ohm input impedance
    Digital input – 16/24-bit AES3 signal, left, right or left + right – 18 – 192kHz Sample Rate – 110 ohm input impedance
    Expansion card slot – For future connectivity upgrades
  • Output XLR digital AES3 (fixed 24-bit @ 96kHz)
  • Network RJ45 for use with PMC SoundAlign web interface
  • Features
    Level Trim (+/-10dB)
    High-pass filter (20 – 200Hz, 12dB/Oct)
    Delay (0 – 30mS)
    Phase (normal or inverted)
    LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)
    Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)
    User presets (3 + factory defaults)
  • Latency 2.4mS
  • Amplifier power per channel LF 2 x 400Wrms MF 1 x 400Wrms HF 1 x 400Wrms
  • Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
  • Power consumption (idle) 50W
  • Power consumption (max) 1500W
  • Cabinet dimensions H 534mm (21”) W 551mm (21.7”) D 440mm (17.3”)
  • Weight 39kg (86lbs) each
Dimensione Woofer (Pollici)

8

DSP

Yes

Offer description

Price for pair

Speaker type

Active

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Return and restocking option is available for private customers only. We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt. It must be returned in the original packaging and in saleable condition and must be returned freight prepaid. Return and restocking rights are not applicable for Audio/Video and software products. Shipping and handling charges to and from are not refundable.

Find out more in our departments

Start typing and press Enter to search

Shopping Cart