PMC8 SUB

Active subwoofer with an 8-inch bass driver and ATL™ bass loading

 3.220,00 ( 2.639,34 + VAT)
Price for single speaker

Available

Shipped in 3-4 Weeks

- +
Finance from 103,75 / month
Low Rate Financing
(Tan 9,90% - Taeg 10,74%)
More info

Available

  • Active subwoofer with an 8-inch bass driver and ATL™ bass loading
  • Frequency response: 25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
  • Max. cont. SPL: 109dB @1m (quarter space value calculated as +3dB from half space measurement.
    Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifier: 300W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP driver protection, EQ, and delay/phase options
  • Dedicated XBD configuration mode
  • Free Shipping
  • After Sale Support
  • 2 Years Warranty
  • Secure Payments

PMC8 SUB

Active subwoofer with an 8-inch bass driver and ATL™ bass loading

The PMC8 SUB is a true low-frequency reference monitor which extends the bass response of your speaker system, imparting more of our signature ultra-clean, ultra-fast low end to any setup.

The PMC8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC6 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL™ bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.

Featuring one custom eight-inch long-throw bass-driver, the PMC8 SUB is powered by a single 300W Class-D amplifier and controlled by the same powerful DSP engine as our other active models. DSP facilities include sophisticated room boundary equalisation options, parametric EQ, time delay, phase inversion, and the unique XBD mode, all configured via the loudspeaker’s rear panel or the browser-based SoundAlign™ software.


Specifications

  • Type Active subwoofer with an 8-inch bass driver and ATL™ bass loading
  • Drive Unit Complement LF PMC 200mm (8”) studio 8 driver
  • Effective ATL™ Length 3m (9.8ft)
  • Frequency Response 25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
  • Sensitivity +4dBu input signal = 98dB SPL @ 1m
  • Max continuous SPL 109dB @1m
    (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Max Peak SPL 121dB @1m
    (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Input XLR switchable between analogue & digital AES3
    Analogue input – +20/+24dBu max. input level (selectable) – 22K ohm input impedance
    Digital input – 16/24-bit AES3 signal, left, right or left + right – 18 – 192kHz Sample Rate – 110 ohm input impedance
    Expansion card slot For future connectivity upgrades
  • Output XLR digital AES3 (fixed 24-bit @ 96kHz)
  • Network RJ45 for use with PMC SoundAlign web interface
  • Features
    Level Trim (+/-10dB)
    High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)
    Delay (0 – 30mS)
    Phase (normal or inverted)
    LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)
    Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)
    User presets (3 + factory defaults)
  • Latency 2.4mS
  • Amplifier power 300Wrms
  • Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
  • Power consumption (idle) 25W
  • Power consumption (max) 300W
  • Cabinet dimensions
    H 266mm (10.5”)
    W 551mm (21.7”)
    D 440mm (17.3”)
  • Weight 18.5kg (40.8lbs) each
Dimensione Woofer (Pollici)

8

DSP

Yes

Offer description

Price for single speaker

Speaker type

Active

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Return and restocking option is available for private customers only. We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt. It must be returned in the original packaging and in saleable condition and must be returned freight prepaid. Return and restocking rights are not applicable for Audio/Video and software products. Shipping and handling charges to and from are not refundable.

Find out more in our departments

Start typing and press Enter to search

Shopping Cart