The DynaMix is composed of two identically designed low-pass gates. Each processing stage features an input connector with level control potentiometer. Hot signals result in soft distortion. The input sections are followed by a VCF and a VCA. The cutoff frequency of the low-pass filter and the level of the amplifier are controlled simultaneously via the Level CV input. For damping incoming control voltages, an attenuator was implemented. Additionally, there is a dynamic section per low-pass gate. It comes equipped with an audio / CV input and a bipolar level potentiometer. The dynamic section can increase or decrease the Level parameter corresponding to incoming audio respectively control voltages. The results are ducking or side chain effects. For emitting audio material, there is an output per low-pass gate. Furthermore, the DynaMix features a mixer. It combines the audio signals of both processing stages. Additionally, there is an auxiliary input.
CONNECTORS
Per low-pass gate
Audio input and output
Level CV input
Dynamic input
Mixer:
Aux input
Audio output
DIMENSIONS
3U Eurorack module, 10 HP wide, 24 mm in depth
Power consumption: 55 mA at +12 V and 45 mA at -12 V