ATC Loudspeakers SCS70 PRO

12” Active Subwoofer

ATC
SKU: 67900
  • Available

3.870,00

For European customers, select your country to view the correct price including VAT.

  • Clock icon Normally shipped in 3 weeks
Warranty extended to 6 anni
  • ATC hand-built high-excursion 12”/300mm SS75-314SC subwoofer driver.
  • Exceptional balance of high SPL capability, low cut-off and low distortion.
  • ATC discrete MOSFET class AB power amplifier.
  • Stereo balanced inputs & stereo ‘Link’ balanced outputs.
  • Level, Low-Pass Frequency & Phase user controls.
  • Remote muting via footswitch.

ATC Loudspeakers SCS70 PRO

Subwoofer attivo da 12”

ATC SCS70 Pro è un subwoofer attivo da 12"/300 mm, progettato per offrire gli eccezionali livelli di prestazioni richiesti dai professionisti dell'audio e della musica e parte integrante della collaborazione con la gamma di monitor attivi ATC. Le sue prestazioni e le sue caratteristiche lo rendono ideale per stereo, surround multicanale e formati audio immersivi come Dolby Atmos.
  • Driver per subwoofer SS75-314SC ad alta escursione da 12"/300 mm costruito a mano da ATC.
  • Eccezionale equilibrio tra elevata capacità SPL, basso cut-off e bassa distorsione.
  • Amplificatore di potenza MOSFET discreto in classe AB ATC.
  • Ingressi bilanciati stereo e uscite bilanciate stereo "Link".
  • Controlli utente di livello, frequenza passa-basso e fase.
  • Silenziamento remoto tramite interruttore a pedale*.
  • Costruito a mano in Inghilterra e coperto da una garanzia di 6 anni.
*Interruttore a pedale fornito separatamente, tipo latching, connessione jack da ¼”/6,35 mm.

Specifiche Tecniche

Acoustic Specifications

Drive Unit – Bass: 1 x SS75-314SC 8Ω.Ω Low Frequency Cut-off: 22Hz (-6dB, half space, low pass filter set at 80Hz). Low Pass Filters: 50Hz, 65Hz, 80Hz, 320Hz. (-6dB, 4th order Linkwitz Riley). MaxSPL: 110dB continuous, 116dB peak (IEC Weighted Pink Noise, 1m, half space, low pass filter @ 80Hz). Sensitivity: +4dBu ref 88dBC (single channel driven, Gain +6dB, Level 0dB, pink noise, low pass filter @ 80Hz).

Electronic Specifications

Amplifier type: Grounded Source MOSFET based Class A-B, convection cooled. Output Power: 300W into 8Ω. THD+N: <0.003%/-90dB, at 100Hz, 300W into 8Ω over 90kHz bandwidth. Balanced Inputs: 2 x Rear Panel Mounted Female XLR, pin 2 hot. Balanced Outputs: 2 x Rear Panel Mounted Male XLR, pin 2 hot. Frequency Response: <2Hz (-3dB) – 320Hz (-6dB, set by panel-controlled LP filter). Gain Control: 0, +6dB, +10dB. Level Control: 0dB -11dB in 1dB steps. Total range 21dB with use of Gain switch. Phase Control: 0-180° ref. Input. Polarity Control: In-phase/Out-of-phase ref. Input. Power Consumption: Idle 8W/14VA. 1/8th Power 170W/230VA. Full Power 500W/600VA. Additional: Mute via ¼”/ 6.35mm Jack socket, controlled via latching footswitch (supplied separately)

Physical Specifications

Dimensions: (H x W x D): 568 x 464 x 500mm / 22 5/16 x 18 1/4 x 19 11/16 inches (heatsink protrudes a further 40mm / 1 9/16 inches from rear). See data sheet for a detailed drawing. Net Weight: 44kg / 97lbs.

Woofer

12

DSP

No

Your cart

Empty cart

Countries and Languages
Comment iconTalk to us