Shadow Hills Industries Oculus Wireless - Control room with Remote controller

Control room with Remote controller

Shadow Hills Industries
SKU: 21036
  • Out of Stock

4.219,00 Ex VAT

For European customers, select your country to view the correct price including VAT.

Shadow Hills Industries Oculus Wireless

Control room with Remote controller

Shadow Hills took the long road, cutting no corners and sparing no expense to make the shadow hills oculus wireless, the finest monitor console ever made. Drawing from years of experience creating some of the most coveted mastering compressors and summing mixers, Shadow Hills designed the shadow hills oculus wireless with an utter devotion to audio integrity. The Remote Pendant wirelessly controls the esoteric architecture and mastering-grade topologies of the shadow hills oculus wireless. This intuitive tactile interface is machined from a solid piece of aluminum, uniting technical innovation with sonic purity to create the ultimate reference monitor controller. Features of Shadow Hills Oculus wireless: Wireless Remote Pendant Mastering-grade, fully-discrete passive volume attenuators for left and right monitors and subwoofer control Five selectable fully balanced input sources Class A active buffer for unbalanced source Three selectable stereo speaker outputs Adjustable speaker trims for equalizing sound pressure levels between monitors Dedicated subwoofer output with trim-able level for each speaker selection Large left and right VU meters Connection for external VU meters and oscilloscope Two Class A audiophile headphone amplifiers Left, right and subwoofer mutes Mono/Stereo selector collapses signals to mono Complete large format console type talkback matrix with internal and external microphones, Class A microphone preamp and remote switching Cue-follow for switching between external cue signals and the current input source selection Auto-cue automatically engages talkback when the “tape” stops rolling   Standard Operations: Volume Control: The large Bakelite knob on the Remote Pendant Is the tactile interface for selecting control room volumes. The single knob simultaneously controls the left, right, and subwoofer levels by means of three distinct, discrete passive attenuators. A properly implemented discrete passive attenuator will always provide superior sound quality over any other topology. This is why nearly every mastering suite, where the price is no object, utilizes this design. All Mute: Pulling the Pendant volume knob up enables a full mute of the monitor outputs. Left/Right Subwoofer Mute: The Pendant push-buttons above the volume Individually mute each speaker. Mono/Stereo: The pendant switch for Mono/Stereo selects the mode in which signal is sent via the monitor outputs. This switch is after the Left/Right mutes. The mono signal playing out of both speaker is derived the unmuted channel or channels. Thus it is possible to hear the left channel in both speakers by muting the right channel, or vice versa. This is a true ‘Mono Sum’ for monitor troubleshooting and phase coherency. The ‘Monophonic’ LED on the Pendant is lit when the output is in mono. Diminish: This reduces the volume in the monitors by half for ease of communication without the requirement of a ‘full mute’ from the monitors. The LED above the ‘Diminish Talkback’ switch on the base station, as well as the ‘Diminish’ LED on the pendant, are lit when the monitors are diminished in volume. Talk Back Diminish Enable: When this feature is enabled, whenever Talkback is engaged, the Monitor outputs dim. If this is not enabled, then the Monitor outputs stay at normal volume while the talkback microphone is active. The LED below the ‘TB-Diminish’ switch is ON when the feature is enabled, and the ‘Diminish’ LEDs on the base station and pendant are lit when the monitor dim is occurring. This feature also works in conjunction with the ‘Autocue’ feature. Auto Cue: Auto Cue is a feature by which the talkback microphone is automatically switched on when source material has stopped playing and is switched off when the source material plays. In other words, it frees the engineer from having to press the talk back switch between every take of a performance. To use the Auto Cue feature, the engineer must patch in a “play signal” into the Auto-Cue input on the back of the base station. Signals such as SMPTE time code or a -10 decibel test tone played back from a striped track are appropriate. During playback, the Talk Back function should still operate as normal. If the Talk Back switch is engaged and playback is detected, the Talk Back microphone will then be turned on. This is useful for instruction the musicians during a take.The ‘A-Cue’ LED is lit when this feature is enabled. Cue Follow: On the base station, there is a separate pair of stereo outputs for headphones called the cue output. When Cue Follow is NOT engaged, the cue is always fed via Source-E, regardless of where the main source select switch is positioned. This allows the engineer to monitor a different source as the performers. When CUE Follow is engaged, the CUE feed “follows” the source selected via the Source Select switch. For example, if the Source Selected is C, then the CUE will be fed the source C signals as well.  The ‘Follow’ LED on the base station is lit when this function is enabled. Class-A Active Buffer for Source A: For unbalanced feeds into the Oculus, or for any other situation where an active, buffered balanced input is needed, use Source A. Enable the Buffer by depressing the small pushbutton labeled ‘Active Buffer Engage’ External Talkback Microphone: Hook any balanced talkback microphone into the XLR input on the backplate and depress the pushbutton labeled ‘External Talkback Engage’ on the back panel. This disengages the internal talkback microphone and exclusively uses the external talkback microphone in its place. Talkback Remote: This 1/4” jack on the back panel enabled an alternate trigger for engaging talkback in the Oculus. When any passive, unbalanced 1/4” switch is used that shorts the tip to ground upon activation, talkback is enabled. This remote can be used in parallel with the existing momentary ‘Talkback’ switches on the Pendant and Base Station.


Monitor, Subwoofer and Cue Outputs Minimum Frequency Response: 1Hz – 100kHz @ -0.1dB THD+N: 0.001% IMD: <0.001% Crosstalk Rejection: >97%; >-100dBu Passive Output Headroom: Infinite Class-A Output Headroom: +28dBu Class A Headphone Amplifier Minimum Frequency Response: Passive: 1Hz – 100kHz @ -0.1dB THD+N: 0.02% Crosstalk Rejection:  >97%; >-102dBu
Your cart

Empty cart

Countries and Languages
Comment iconTalk to us