AKG C636

AKG C636

Condenser vocal microphone

Be aggressive, the C636 can take it

If you’ve ever tried to bring a studio mic on stage, you know they’re too delicate to stand up to the task. The C636 mic’s proprietary double shock suspension system greatly reduces handling noise, even during the most energetic on-stage performances. Its capsule sits on a highly absorbent rubber bearing, eliminating any structure-based noise, while an adjustable balancing network cancels vibrations over a wide frequency range. In addition, a substantial brass layer below the capsule serves as a counterweight that increases stability and delivers cleaner acoustics.

A new approach to broad-spectrum feedback rejection

The C636 essentially eliminates feedback by combining a uniform cardioid polar pattern throughout the entire frequency spectrum with a specially designed suspension and grille for the capsule. This unique approach to housing the capsule avoids unwanted sound reflections on the back of the capsule from stage sound sources, the most common cause of feedback in other microphones.

Step on stage with a studio legend

Step on stage with a studio legend. The new AKG C636 is the legendary C535 updated for today’s rigorous live performance requirements. Offering the pure studio sound you’ve grown to love, housed in a worry-free durable housing, you can now focus on your vocal performance—not on the performance of your microphone.

Spend a few minutes with the AKG C636, and you’ll realize you’ve never held a mic like this. Its proprietary double shock suspension system provides unparalleled rejection of handling noise. And the C636 doubles­-down on keeping your performance flawless by incorporating a state-of-the-­art, multi-­layer pop noise rejection system that eliminates plosives and a consistent, cardioid polar pattern that eliminates feedback.

Made with hand-­selected components and manually tuned for a pure transparent tone, the new C636 retains the spirit of the classic AKG C535 condenser microphone, while being updated to meet the demands of today’s top vocal performers.

Specifications

General Specifications

Type 3/4” Back electret condenser
Polar Pattern Cardioid
Sensitivity 5.6 mV/Pa
Audio frequency bandwidth 20 – 20000 Hz
Electrical impedance 200 Ohms
Recommended load impedance 2000 Ohms
Equivalent noise level 20 dB-A
Signal to Noise 74 dB-A
Max. SPL for 1 % THD 150 dB
Operating temperature range -10 to 60 Celsius (14 °F – 140 °F)
Bass cut filter 80 Hz, 12 dB/octave

Dimensions

Length 185 mm
Diameter 51 mm
Net Weight 312 g

Design

Body metal
Finish matte black

Audio Output

Type Balanced XLR
Gender Male
Contacts 3-pin

Powering Interface

Voltage 48 V
Current 4 mA

Application

Live Vocal Yes

Instrument

Vocals Yes