Audient iD22

• 10-in, 14-out Desktop Interface
• 2 x Class-A Audient Console Mic Preamplifiers
• High Performance Burr Brown AD/DA Converters
• Fully Balanced Inserts
• ADAT Input & Output for Expandability
• 1 x Discrete JFET Instrument Input
• Low Latency DSP Mixer
• Main and Alternative Speaker outputs
• Independent Class-AB Headphone Output
• User Defined Function Keys
• Full Monitor Control Functionality (software controlled)
• USB2.0 Compliant
• 24bit/96khz
• All-Metal Enclosure

Audient iD22

Interfaccia Audio 10 in / 14 out

Audient Console Mic Pres

The professional sound you deserve We are the only company that use the same Class-A mic pre design throughout our entire product range, whether you’re in the studio with an Audient console or on the road with iD22, you’re always guaranteed the same world class Audient sound. Pristine Converter Technology Brilliance on the inside enables brilliance on the outside iD22 provides you with high performance AD-DA converters from Burr Brown, the leaders in converter technology. Quality in the analogue stages of design comes from years of experience as analogue console designers, and when coupled with outstanding converter technology it enables you to hear audio as it’s supposed to sound. The importance of converters should never be underestimated. Experience audio the Audient way.

Expand

Grows with your needs iD22 is more than just a two in, six out interface. As your system grows iD22 can be expanded via the optical input and output connectors, supporting both ADAT and SPDIF. If you need to track drums or simply need more inputs you can expand up to ten inputs via an eight-channel mic pre such as our ASP880.

Balanced Inserts

Integrate your outboard Two fully balanced insert points enable you to bring your outboard gear in from the cold and prior to conversion. Insert your favourite compressors or EQs and start creating vocal chains that rival the very best. The insert return also gives you direct access to the analogue to digital converters - providing the cleanest signal path possible, making it great for print-backs or integrating outboard line level sources.

Plug And Play

Plug in and be inspired As well as offering you 2 channels of mic pre, iD22 has a harmonically rich JFET D.I input. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly

Listen

You can't unhear quality During iD22's development we discussed ways in which we could showcase iD22's versatility in a variety of genres. We were so confident you could make a release quality recording with iD22 we decided to get out in the field and record three different artists varying in style. Listen to the result for yourself...

Console Style Monitor Control

Customise your control surface iD22 has a range of incredibly flexible console style monitor control functions such as mono, polarity, dim, cut, speaker select, talkback & cue mix monitoring. We know how important it is to focus on the music and to make tracking as simple as possible we added three programmable function keys. No more time spent searching for software controlled features, just assign the monitoring functions you need to the three hardware function keys and allow the creativity to flow. Real hardware control at your fingertips!

Intuitive software

Software you can rely on We understand the need to keep things simple and iD22’s mixer app was designed with that in mind. Whether you’re creating low latency cue mixes or utilising the flexible monitor control, iD22 tightly integrates the hardware and software making the recording process easy. Enabling you to concentrate on what’s really important - the music.

Talkback

Communication is Key iD22’s new dedicated talkback technology enables you to utilise any audio source connected to your computer such as a built in or USB microphone as your talkback mic, freeing up valuable mic pres while offering an effective talkback solution no matter where you are.. Use your computers built in mic for talkback

Built To Last

Quality deserves protection iD22 has been designed to last, from its all-metal construction, hand finished aluminium knobs and high grade component selection, iD22 will stand up to countless late nights in the studio and days on the road.

---

Specifiche Tecniche

MICROPHONE PREAMPLIFIER:

(measured to insert send)

MIC GAIN:	-10 to +60 dB (-10dB Pad)
LINE GAIN:	-20 to +40 dB (-10dB Pad)
PHANTOM POWER:	48v +/-4v @ 10mA/Channel
MIC EIN:	<-125dBu
CMRR:	>80dB @ 1kHz
MAXIMUM INPUT LEVEL:	+22dBu (+32dBu with Pad)
INPUT IMPEDANCE (Mic):	>3kΩ Balanced
INPUT IMPEDANCE (Line):	>10kΩ Balanced
FREQUENCY RESPONSE:	+/-0.5dB 10Hz to 100kHz
CROSSTALK:	<-90dBu @ 1kHz & 10kHz
THD+N @ 0dBu (1kHz):	0.0015% (-96dBu)
SNR:	96dB
HPF:	-3dB @ 100Hz, 2nd Order (12dB/Octave)

XLR:	Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4” JACK:	TIP (Hot), RING (Cold) & SLEEVE (Shield)

D.I (Channel 1):

(measured to insert send)

D.I GAIN:	-16 to +54 dB (-10dB Pad)
MAXIMUM INPUT LEVEL:	+16dBu (typical), +22dBu
INPUT IMPEDANCE:	1MegΩ Unbalanced
FREQUENCY RESPONSE:	+/-0.5dB 10Hz to 50kHz
THD+N @ 0dBu (1kHz):	<0.03% (-70dBu)
SNR:	93dB
1/4” JACK:	TIP (Hot) & SLEEVE (Shield)

INSERT SENDS (Mic Pre Out):

MAXIMUM OUTPUT LEVEL:	+22dBu
OUTPUT IMPEDANCE:	<100Ω Balanced

1/4” JACK:

TIP (Hot), RING (Cold) & SLEEVE (Shield)

POWER SUPPLY:

• 12VDC Centre Positive DC Adapter - >1.5Amps
• Internally conditioned to provide +48VDC, +/-15VDC & low voltage rails for digital processing core & converters.
• iD22 cannot be bus powered for quality reasons.

ADC LINE INPUTS (Insert Returns):

(measured at optical output under AES-17)

MAXIMUM INPUT LEVEL:	+18dBu
DIGITAL REFERENCE LEVEL:	0dBFS = +18dBu
INPUT IMPEDANCE:	>10kΩ Balanced
FREQUENCY RESPONSE:	+/-0.5dB 10Hz to Fs/2
CROSSTALK:	-100dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz):	<0.002% (-94dB)
THD+N @ -6dBFS (1kHz):	<0.0015% (-97dB)
DYNAMIC RANGE:	117dB un-weighted 120dB A-weighted
1/4” JACK:	TIP (Hot), RING (Cold) & SLEEVE (Shield)

DAC OUTPUTS (1-4):

(measured from optical input under AES-17)

MAXIMUM OUTPUT LEVEL:	+18dBu
DIGITAL REFERENCE LEVEL:	0dBFS = +18dBu
OUTPUT IMPEDANCE:	<100Ω Balanced
FREQUENCY RESPONSE:	+/-0.5dB 5Hz to Fs/2
CROSSTALK:	-110dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz):	<0.0008% (-101dB)
DYNAMIC RANGE:	110dB un-weighted 114dB A-weighted
1/4” JACK:	TIP (Hot), RING (Cold) & SLEEVE (Shield)

HEADPHONE OUTPUT (5&6):

(measured from optical input under AES-17)

MAXIMUM OUTPUT LEVEL:	+18dBu
DIGITAL REFERENCE LEVEL:	0dBFS = +18dBu
OUTPUT IMPEDANCE:	<50Ω Balanced
FREQUENCY RESPONSE:	+/-0.5dB 5Hz to Fs/2
CROSSTALK:	-110dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz):	<0.0008% (-101dB)
DYNAMIC RANGE:	110dB un-weighted 114dB A-weighted
MAX LEVEL INTO 30ohms:	+8dBu, 0.0032% THD+N, 2.75Vpk Power: 250mW or Pavg 125mW
MAX LEVEL INTO 60ohms:	+11dBu, 0.0022% THD+N, 4.3Vpk Power: 300mW or Pavg 150mW
MAX LEVEL INTO 600ohms:	+17.2dBu, 0.0013% THD+N, 7.94Vpk Power: 105mW or Pavg 52.5mW
1/4” JACK:	TIP (Hot), RING (Cold) & SLEEVE (Shield)

DIGITAL i/o:

ADAT 8 CHANNELS	44.1 - 48kHz
ADAT 4 CHANNELS	88.2 - 96kHZ
STEREO S/PDIF	44.1 - 96kHz

USB2.0 HIGH SPEED

No. of INPUT CHANNELS 10	(2 Analogue, 8 Digital)
No. of OUTPUT CHANNELS 14	(6 Analogue, 8 Digital)

iD DSP Mixer Roundtrip (in to out) Latency:

44.1 kHz	1.43ms
48.0 kHz	1.31ms
88.2 kHz	0.719ms
96.0 kHz	0.656ms

DAW Playback Latency @ 32 Sample Buffer for Software Instrument Playback:

44.1 kHz	3.166ms
96.0 kHz	2.12ms

DAW Roundtrip Software Monitoring Latency @ 32 Sample Buffer (in to out):

44.1 kHz	6.18ms
96.0 kHz	4.51ms