Eventide Power Factor 2

Power Supply for Guitar Pedals

Eventide PowerFactor 2 has 8 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 2200mA it’s a perfect solution for bigger rigs only with pedals using a DC power source. Its four powerful sections with 400mA each will power up to four Eventide stompboxes. The first 4 outlets, offering 2x100mA and 2x200mA, are perfect for standard 9V battery operated pedals.

– 8 outlets configured in 8 isolated sections
– Toroidal transformer with additional magnetic field shielding
– 4 powerful DC sections with 400mA each, able to power four Eventide Factor pedals
– Mounting kit included
– Short circuit protection of all outlets
– Advanced LED monitoring of each section
– Temperature monitoring
– 115V/230V mains voltage selector switch
– Standard IEC Power Cable (included)
– Durable steel enclosure with 2mm thick top
– Size: 8.5” x 3.5” x 1.75”, 216mm x 89mm x 44.5mm (with rubber feet on)
– Weight: 3.25 lbs , 1.47 kg
– 13 Flex cables included:
2 x 4050 Flex 4 for Eventide stompboxes – 50cm (19”) w/5.5/2.5mm center positive DC-plug (green) right angle
1 x 4030 Flex 4 for Eventide stompboxes – 30cm (12”) w/5.5/2.5mm center positive DC-plug (green) right angle
3 x 1030 Flex 1 for Boss type 50cm (12”) with 5.5/2.1mm center negative DC-plug (black) right angle
2 x 1050 Flex 1 for Boss type 50cm (19”) with 5.5/2.1mm center negative DC-plug (black) right angle
1 x 2050 Flex 2 for Fulltone Octafuzz type 50cm (19”) with 5.5/2.1mm center positive DC-plug (red) right angle
1 x 5050 Flex 5 for EH/DOD type 50cm (19”) with 3.5mm tip positive mini-jack plug (black) right angle
1 x 6050 Flex 6 – 50cm (19”) with 9-volt type battery-clip (black)
1 x 1035 Split Flex – 30 (12”)& 50cm (19”) with 5.5/2.1mm center negative DC-plug (black) for powering two pedals from one outlet
1 x 1022 Stack Flex 1 – 50cm with 5.5/2.1mm center negative DC-plug (white/black) for merging two 9V to get 18V (for a maximum of 80mA)

Outlet Specifications:
· Outlet 1-2: 9V or 12V DC / 100mA each
· Outlet 3-4: 9V or 12V DC / 200mA
· Outlet 5-6: 9V or 12V DC / 400mA
· Outlet 7-8: 12V DC / 400mA