- Active 2-way nearfield reference monitor with ATL™ bass loading
- Frequency response: 39Hz – 25kHz (- 3dB @1m full space, on-axis)
- Max. cont. SPL: 106dB @1m (half space value calculated as +3dB from full space measurement.
Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) - State-of-the-art Class-D amplifiers: HF 200W, LF 200W
- Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz)
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
- Automatic portrait/landscape placement DSP correction
- PMC6 + PMC8 SUB creates PMC6 XBD, with LF down to 25Hz
- Ceiling-mount yoke allows suspension in multi-channel or immersive systems
PMC6
Active 2-way nearfield reference monitor with ATL™ bass loading
€ 6.405,00For European customers, please select your country to view the correct price including vat
Price for pair
In stock.
Low stock, hurry up!
Order before 12:00 am, we can ship this product today
Add to WishlistKEEP IN TOUCH
Find out our opening hours
Your contact for the Pro Audio department

Showroom Sintetizzatori:
Lun - Mer: 10:00 - 13:00 / 14:00 - 18:00
Giov - Ven: 10:00 - 13:00
Reparto Pro Audio:
Lun - Ven: 10:00 - 13:00 / 14:00 - 18:00
Visite su appuntamento
In stock.
Low stock, hurry up!
-
Free Shipping
Free Shipping
For all orders over € 250, shipping in Italy will be free. All our shipments are managed by national and international couriers with express service to guarantee delivery in 24h * from the dispatch of the goods from our warehouse. * For the islands and some remote areas the timing could increase to 48h. -
After Sale Support
After Sale Support
At your side to grow with you. Behind this website there are real people who work every day to always offer the best possible service and give maximum support even after the purchase. - 2 Years Warranty
- Secure Payments
- Active 2-way nearfield reference monitor with ATL™ bass loading
- Frequency response: 39Hz – 25kHz (- 3dB @1m full space, on-axis)
- Max. cont. SPL: 106dB @1m (half space value calculated as +3dB from full space measurement.
Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) - State-of-the-art Class-D amplifiers: HF 200W, LF 200W
- Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz)
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
- Automatic portrait/landscape placement DSP correction
- PMC6 + PMC8 SUB creates PMC6 XBD, with LF down to 25Hz
- Ceiling-mount yoke allows suspension in multi-channel or immersive systems
PMC6
Active 2-way nearfield reference monitor with ATL™ bass loading
The PMC6 is packed with innovation and providing the same sonic signature as our renowned larger monitors, it’s ideal for smaller control rooms or for use in larger immersive systems, where its astounding resolution allows critical mix decisions to be made with absolute confidence.
With 20mm of excursion, the bespoke 6-inch bass driver is designed specifically to integrate with our latest ATL™ bass-loading and Laminair™ airflow technologies. The combination outperforms most 8-inch monitors, offering unparalleled bass extension, headroom, dynamics, and low distortion at all levels. The high end is courtesy of a one-inch precision-built fabric soft-dome tweeter, with a shallow waveguide that creates wide, tonally consistent dispersion and rock-solid imaging. Both the bass and treble drivers are precisely and individually controlled by a pair of 200W ultra-low-distortion, high-damping-factor Class-D amplifiers.
Whether in portrait or landscape placement, the PMC6’s sophisticated DSP engine automatically adjusts the crossover, ensuring optimum tonal accuracy, phase and imaging.
The monitor can be calibrated using the rear-panel controls or with PMC’s intuitive browser-accessible SoundAlign™ software.
The PMC6 can be upgraded by adding a PMC8 SUB to create a full-range, free-standing PMC6 XBD system. Activating the ‘XBD’ DSP mode ensures the perfect marriage of the two units, creating a clean LF extension down to 25Hz.
Specifications
- Type Active 2-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement
LF PMC 150mm (6”) studio 6 driver
HF PMC 27mm (1”) soft dome tweeter - Effective ATL™ Length 1.8m (5.9ft)
- Frequency Response 39Hz – 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL 106dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) - Max Peak SPL 118dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) - Directivity H +/-60 degrees V +50/-40 degrees (-6dB off axis @10kHz)
- Input XLR switchable between analogue & digital AES3
Analogue input – +20/+24dBu max. input level (selectable) – 22K ohm input impedance Digital input – 16/24-bit AES3 signal, left, right or left + right – 18 – 192kHz sample rate – 110 ohm input impedance
Expansion card slot – For future connectivity upgrades - Output XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network RJ45 for use with PMC SoundAlign web interface
- Features Level Trim (+/-10dB) Orientation (portrait, landscape, auto) High-pass filter (20 – 200Hz, 12dB/Oct) Delay (0 – 30mS) Phase (normal or inverted) LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707) Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB) User presets (3 + factory defaults)
- Latency 2.4mS
- Amplifier power per channel
LF 1 x 200Wrms
HF1 x 200Wrms - Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle) 35W
- Power consumption (max) 400W
- Cabinet dimensions Portrait
H400mm (15.7”)
W 215mm (8.5”)
D 372mm (14.6”) - Cabinet dimensions Landscape
H 215mm (8.5”)
W 400mm (15.7”)
D 372mm (14.6”) - Weight 11.1kg (24.4lbs) each
Dimensione Woofer (Pollici) | 6 |
---|---|
DSP | Yes |
Offer description | Price for pair |
Speaker type | Active |
Only logged in customers who have purchased this product may leave a review.
Return and restocking option is available for private customers only.
We will issue a refund/credit if you are not satisfied with your purchase and notify us within 10 days of product receipt.
It must be returned in the original packaging and in saleable condition and must be returned freight prepaid.
Return and restocking rights are not applicable for Audio/Video software products.
Shipping and handling charges to and from are not refundable.
You might also be interested in one of the following products
-
Genelec 8010AW
€ 295,00For European customers, please select your country to view the correct price including vat
Brand: Genelec
Monitor 2-way with 3″ woofer
Arriving shortly
Contact us to verify delivery timesFree shipping in Italy
-
Genelec 8050B
€ 1.369,00For European customers, please select your country to view the correct price including vat
Brand: Genelec
2-way nearfield monitor with 8″ woofer
In stock
Free shipping in Italy
Order before 12:00 am, shipment will be processed in two working days
-
GENELEC 8020DWM
€ 455,00For European customers, please select your country to view the correct price including vat
Brand: Genelec
Monitor nearfield a 2 vie con woofer 4″
In stock
Free shipping in Italy
Order before 12:00 am, shipment will be processed in two working days
-
Adam A77X (A)
€ 829,00For European customers, please select your country to view the correct price including vat
Brand: Adam
Tri-amplified monitor, 2 woofer 7″, A.R.T tweeter, 250W RMS
Out of Stock
Free shipping in Italy
Reviews
There are no reviews yet.