AKG C12 VR

Multi-polar large-diaphragm tube microphone

• Reference tube condenser microphone for professional studios
• Nine selectable polar patterns via a remote control unit
• Capsule inspired by the legendary original AKG C12 from the 1950s
• 6072A tube, hand-selected and assembled in Vienna, Austria
• Extended frequency response from 30 Hz to 20 kHz
• Built-in high-pass filter and attenuation pad
• Ideal for vocals, wind instruments, and guitar and bass amplifiers

The AKG C12 VR is one of the most iconic and sought-after tube microphones in the world of professional recording. A modern evolution of the legendary original C12—considered by generations of sound engineers and producers to be an absolute benchmark—this microphone delivers a refined, detailed, and three-dimensional sound while retaining the sonic character that made the historic model famous.

The Legendary Sound of the AKG C12 VR

Designed and handcrafted in Vienna, the C12 VR uses a carefully selected 6072A tube and a capsule developed to reproduce the tonal character of the original model. The result is an extremely natural reproduction of sound sources, with an open and airy high end, well-defined mids, and deep yet controlled low frequencies.

Multi-pattern microphone for maximum flexibility in the studio

Thanks to nine polar patterns selectable via a dedicated remote control, the C12 VR offers exceptional versatility in any professional recording setting. The available configurations allow you to adapt the microphone’s behavior to a wide range of recording needs, from solo vocals to orchestral sections to ambient recording.

Remote control of polar patterns

Cardioid, Omnidirectional, and Figure-8 modes—along with intermediate positions—allow you to optimize the microphone’s response based on the environment and sound source, ensuring consistently professional results.

Professional performance for vocals and instruments

The AKG C12 VR is an excellent choice for recording vocals, wind instruments, guitar and bass amplifiers, and many other studio applications. The combination of tube technology, high-quality electronics, and handcrafted construction delivers a sound rich in detail, depth, and musicality.

Technical Specifications

• Type: Large-diaphragm tube condenser microphone
• Polar patterns: 9 selectable positions, Cardioid, Omnidirectional, Figure-8, and intermediate patterns
• Frequency response: 30 Hz – 20 kHz
• Sensitivity: 10 mV/Pa
• Equivalent noise level: 22 dB-A
• Signal-to-noise ratio: 72 dB-A
• Attenuation pads: -10 dB / -20 dB
• High-pass filter: 100 Hz / 130 Hz
• Nominal impedance: 200 Ω
• Recommended load impedance: 1000 Ω
• Tube: 6072A
• Audio output: 3-pin balanced XLR
• Height: 225 mm
• Diameter: 42 mm
• Weight: 680 g
• Finish: Green/Gold
• Recommended applications: Professional studio, vocals, wind instruments, guitar and bass amplifiers
• Manufacturing: Hand-assembled in Vienna, Austria